Anode Baskets, Titanium Anode Baskets

Basic information

Anode Baskets, Titanium Anode Baskets:

We provide many types of very durable titanium anode baskets to fit all metal finishers process lines. Some of the advantages of our titanium baskets are:

VARIOUS MESH TYPES INCLUDE

Perforated

Expanded metal with 60% to 80% open area

ROUND CONFIGURATION

Heavily reinforced

Vertical band supports

Horizontal band supports

Solid bottom construction

Top reinforcing support ring

Typical 2 ½” diameter or larger if needed

RECTANGULAR CONFIGURATION

Double contact carrier hooks

Hooks extend well into basket for added support

Heavily vertical reinforcing

Typical baskets are 2 ½” x 6” x the length of 8” to 72” or longer if needed

CUSTOM BASKETS INCLUDE

Conforming anode

Dipping baskets of all types

Spiral

HIGH QUALITY MATERIALS:

Titanium

Zirconium

316 stainless steel

tantalum

ARIOUS MESH TYPES INCLUDE

Considerations For Basket Sizing:

Baskets should be 2" to 4" shorter than the longest piece of work.

Baskets should be 1" above the solution level.

Hook length is measured from the top of anode bar to 1" above the solution level.

Quantities for rectangular baskets should be three (3) 2 ½" x 6" baskets for every two feet above the bar

Sizing And Styles:

Rectangular Baskets: 2-1/2" x 6" - Standard Stock Lengths include 18", 24", 30", 36". Other lengths are built to order.

Round Baskets: 2 1/2" Diameter x Length - Standard Stock Lengths include 18", 24", 30", and 36". Other lengths are built to order

Basket Amperage & Hooks
Rectangular Baskets are standard with 50 AMPS/Basket Double Contact Hooks. Higher Amperage is available (i.e., 100 Amps, 150 Amps and 200 Plus Amps).

To determine the AMPS needed per basket, please use the following formula:

AMPS needed per Basket = Total AMPS of TANK

Total # of Baskets

Amperage Rating Per Hook:

25AMP = 1/8" x 1" Double Contact Hook or 3/8" Square Bar Hook

50AMP = 1/4" x 1" Double Contact Hook or 1/2" Square Bar Hook

75AMP = 3/8" x 1" Double Contact Hook or 5/8" Square Bar Hook

100AMP = 1/2" x 1" Double Contact Hook or 3/4" Square Bar Hook

Normal Application:

Inverted "V" Lift Hooks

Inverted "U" Hooks

"T" Handle Lift Hooks

Reverse Lift Hooks for easier access in lifting baskets

Submergible Hooks

Loading Chutes for easier anode loading

Mesh on 4 sides of basket for greater anode to cathode ratio

For Heavy Duty applications, PH offers the following anode basket options:

Heavier hooks for strength and current carrying capabilities

Ti Clad Copper Hooks for higher amperage rating

Thicker mesh material to minimize bulging of basket

Thicker side channel construction