CE Conductive Liquid Level Control
CE Conductive Liquid Level ControlLevel probes & Float Switches(PP/PVDF)Provides automated control and consistent liquid levels in most conductive aqueous processes, waste treatment tanks and when leak detection is required.Adds protection against damage and tank fires associated with low-level conditions.Probe enclosure: vapor tight, flame retardant, polyproylene head with 10-foot (3m) flexible cord and quick connect plug for easy connection to remote circuitry.Two probe units (LP-2): for single point control. Multi probe units (LP-3): for two-point control and refill/pump down applications. 4,5 or 6-probe devices for multiple level control applications, LCBA5 - Level switch electronics (only) mounted in plastic enclosure. 2-probe unitsElectronic Assembly field selectable voltage 120/240V.LCBE5 - Level switch electronics (only) mounted in plastic enclosure. 3-probe unitsElectronic Assembly field selectable voltage 120/240V.Control enclosure: gasketed NEMA 1, IP21 flame retardant, polypropylene box with stainless steel hardware.*Specify probe material: (S) = STAINLESS STEEL, (T) = TITANIUM, (H) = HASTELLOY C, (G) = GRAPHITE (not field trimmable). (FLUOROPOLYMER (PTFE) COVERED STANDARD)Features and Benefits:IMPROVES PROCESS CONTROL:Provides automated control and consistent liquid levels in most conductive aqueous processes, waste treatment tanks and when leak detection is required.Adds protection against damage and tank fires associated with low-level conditions.Two probe units: for single point control.Multi probe units: for two-point control and refill/pump down applications.CORROSION RESISTANT PROBES:Fluoropolymer (PTFE) covered: 316 stainless steel, titanium, Hastelloy C and graphite tipped Hastelloy probe materials.Lengths: up to 48 inches (1220mm) standard.Field trimmable (except graphite probes).CORROSION RESISTANT ENCLOSURES:Control enclosure: gasketed NEMA 1, IP21 flame retardant, polypropylene box with stainless steel hardware.Probe enclosure: vapor tight, flame retardant, polypropylene head with 10-foot (3m) flexible cord and quick connect plug for easy connection to remote circuitry.CERTIFICATIONS:cULus and CE.CAPACITIES:Relay rating: 10-amps at 120 to 240 volts, 50/60Hz, single pole, double throw.Sensing output: 14.5 VAC.Ambient temperature range: 0°F (-18°C) to 104°F (40°C).Maximum solution resistance: 70,000 ohm-CM.Single phase only.SAFETY FEATURES:Ground connection on circuit board.Minimal AC sensing current has no affect on plating processes.OPTIONS AVAILABLE (consult factory):Probe lengths up to 20-foot (6m).LC circuit board can be pre-wired into combination controls.Fluid stilling chambers.Longer probe cords.Probe cord extensions for existing units.4, 5 or 6-probe devices for multiple level control applications.