DC Rectifiers 30V10AOutput power: max. 100 Watt DC current: max. 10A (at 10V)DC voltage: max. 30V (at 3A) Typical applications: Laboratory plating lines Precious metal plating: Reel-to-reel platingPCB lines:Manual plating lines DC power supply with switch mode technology, designed forfor installation into cabinet. Black anodized Aluminium housing, protection grade IP20DC connector pluggableMains supply pluggableControl terminal via RJ45Optionally the rectifier can also be installed in to a 3U/HE rack Characteristic valuesLinearity inaccuracy:- for amperage Ripple less than Mains supply: 230 V +/- 10 % / 50-60 Hz(other voltage on request)CoolingAir cooled, convection coolingAmbient temperature 5 - 40°C DisplayStatus-LED, Blink...
Three phase Control PanelAll plastic design for a perfect usein surface treatment plants andchemicals storage areas DescriptionGalvabox 5T15-3 Control Panel, Three phasesCompact, simple to use, ready to plugDigital displayIP55A simple solution for regulation: this PID digital display control box (with input PT100 3 wires) controls up to 15 kW 400V three-phases, 50/60 Hz.Galvabox 5T15-3On-off switch with indicator light on the front.Five cable-glands for: box supply, immersion heater, PT100 probe, level security and thermal security.Accessories and OptionsPT100 3 WIRES PROBESCompact and ready to plug the galvabox range is simple to use.Digital display of set point temperature as well as temperature measured for an efficient control.The control box includes a plug-in terminal which cent...
PTFE & PVDF & PFA Ultra-Pure In-Line Fluid HeatersC series Heaters for Aggressive Acids & ChemicalsHC Series in-line heaters are ideal for high-temperature, ultrapure processes. They feature PFA flow paths for optimal compatibility with aggressive chemicals. Their special internal fittings eliminate O-rings seals for enhanced cleanliness. HC heaters utilize the low-mass PreciseHeater® heating element with low watt density to provide fast, powerful temperature response.Features & Benefits• Ultrapure PFA wetted surfaces for optimal chemical compatibility• Specialty fittings eliminate wetted O-rings to enhance cleanliness and reduce potential for leaks• Fast, powerful temperature response from low-mass heating element with low watt density• Up to 120°C at 60 psi• 1-1...
3HS Series, 3 Element Stainless Steel HeatersOver the side, durable, efficient, 3 element, tubular chemical heater. Available in Steel, 304 Stainless Steel, 316 Stainless Steel, and Titanium. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Three phase. Three phase. 3000-10500 watts, 200- 600 volts.FEATURESFor use in most aqueous alkaline solutions and rinse tanks. Checksolution recommendation chart with your chemical supplier forproper sheath material selection.Heavy wall metal sheaths available in: steel, 304 stainless steel,316 stainless steel, titanium.Watt densities up to 40 watts per square inch (6.2 w/cm2) ensurelong service life.Vapor-resistant, flame retardant polypropylene termimal enclosurewith 3 ft (.9m) flexible PVC liquid t...
Titanium Clad Copper Bar/ Tube/ WireWe know the anodizing process and we build equipment that will empower you to excel in today’s competitive markets. PreciseHeater-built systems have set the bar for design, quality, and efficiency to meet almost any budget. Whether your anodizing application is for aerospace, automotive, sporting goods, medical, military and defense, or consumer and recreation goods, we can optimize the system to meet your specific application needs and process requirements.Applications:DesalinationWater TreatmentPower GenerationChemical ProcessingOur Products of Clading Copper with Titanium and Zirconium are as follow:Titanium Clad Copper RodZirconium Clad Copper RodTitaniun Clad Copper WireTitanium(Zirconium) Clad Copper Round RodTitanium (Zirconium) Clad Cop...
Teflon Immersion Coils ExchangerEliminates stray currents in tanks. Excellent chemical compatibility and rugged design for your heating or cooling application. All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction with a heavy duty CPVC/PVDF mounting bracket. Standard coils are PTFE and rated up to 80 PSI steam service. PFA coils are available for steam service up to 80 PSI. 10 PSI minimum steam pressure required for operation. Heavy wall tubing improves circulations and reduces pressure drop. Features & Values3⁄4 All wetted parts of fluoropolymer (FEP, PFA or PTFE)construction with a heavy duty CPVC mountingbracket.3⁄4 Heavy wall tubing improves circulation and minimizespressure drop. Larger coils constructed of 1/2 inch(13mm) tubing, smaller coils have 1/...
Titanium Cartridge Filter (Bag type Filter)Many special treatments such as electroplating,chemical agents, and eelectrolysis involve corrosive materials.In response to the needs of different industries,titanium is used to make corrosion resistant filters.Pressure resistant. Suitable for filtering of various chemcial fluids.High filtration rate and durable. There have a rod inside for fixing on the filter. Filter effects guaranteed.Filter specification/entry and exit locations can be made according to the solution and installation need.For the production of pure titanium material, corrosion resistance, this kind of filter is small in size, light weight, convenient use, large filtering area, low block rate, filtering speed, no pollution, thermal dilute stability and chemical stability i...
Lead anodes for Surfaces TreatmentsGeneral descriptionPreciseHeater has a long-term experience in the manufacture of lead anodes. Our extrusion press, developed by PreciseHeater, enables the manufacturing of homogeneous, high density and fine-grained pieces while guaranteeing even wear of our products and a long service life. This machine allows us to maintain this uniformity in very long pieces. At PreciseHeater, we work continuously to improve our production process. This enables us to provide every customer with specific solutions, extremely tight deadlines and very competitive prices in products of the highest quality.ApplicationsSpecial mention should be made of those products used in the hard chrome process, but we also manufacture models that are used in aluminium anodizin...
Titanium Anode Baskets Standard Styles and SizesRectangular—21⁄2′′×6′′×LengthRound—21⁄2′′ Diameter × LengthStandard Stock lengths include 18′′, 24′′, 30′′. Other lengths built to order.All Baskets available in Titanium, Zirconium, Stainless Steel and Monel Mesh Types & Choosing the Right OneMini-Expanded—3⁄16′′×SWD×1⁄2′′LWD............ 65%meshopenareaLarge-Expanded—1⁄2′′×SWD×11⁄4′′LWD........... 75%meshopenareaPerforated — 1⁄2′′ dia. on 11⁄16′′ staggered centers . . . . . . . 50% mesh open areaSWD = Short Width Dimension LWD = Long Width Dimensions on Diamond PatternIndustry Standard calls for 2:1 Anode to Cathode ratio when calculating anodesin a bath.Mini-Expanded Mesh is the most commonly used mesh type, offering a compromise between...
Horizontal Disc Filtration SystemsOur smallest Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.Designed for the filtration of nickel, copper and zinc electrolytes.Operating temperature to 180 °F (82 °C)For plating tanks from 200 to approximately 400 gallons depending on the type of process.Can be supplied with horizontal discs or cartridges depending on the application.Filter Pack Easily MaintainedAll filter discs are configured as a 'unitized pack' to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.SpecificationsPrecoated Flow Rate (Filtering Capacity)600 gphOpen Pumping Capacity2,400 gphFiltration Surface Area7 ft²Number of Filter Media20...
Polypropylene Cartridge Filter Chambers 2008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate3,840 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight265.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Metal Triple Tube Style Plating Immersion Heater These heaters – the 3P, 3S, 3F, and 3T series – are built with three side-by-side elements and fit easily next to the wall of a tank. The standard wiring is three-phase, but single-phase is available. They have a watt density of 35 W/in².Select a heater below by wattage and sheath material to go to an ordering page, where you can choose voltage and other options. If you don't know what sheath material you need, you can use our Material Selector.Design Features for TMM2T1 thermal fuse protection standard; T2 bi-metal switch optionalGrounded for safetyVapor-tight polypropylene terminal enclosure with universal mounting flangeStandard 3-ft. flexible PVC liquid-tight conduit120, 240, 480 volts standard as listed...