Plastic Immersion-Type Heat ExchangerFurther details:Possible materials: PE-RT,PFA,FEP, PP and PVDFTemperature range: -22 to 284 °F (depending on the material chosen)Working pressure range: 45.5 to 232 oF (depending on the material chosen and the operating temperature)Cooling/heating/condensing Heating and cooling of corrosive or scale forming fluids and highly concentrated inorganic acids in open tanksHeating, cooling, condensing or evaporation of corrosive media in vesselsCustomized design from modular, pre-manufactured tube sections10 to 375 ft2 heat transfer surfaceFor use with water, steam or cooling media High cooling and heating efficiency Flexible and compact designFully corrosion resistantSafe heat transfer mediumBest in class flow efficiencyEasy maintenance an...
Metal Sheath Over the side Heater - Titanium Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 316 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 120-240 V2 for 3 phase 120-240 V3 for 3 phase 208-600 V4 for 1 phase 208-480 V5 for 3 phase 415 V,600VWattsSurface RatingHot zoneLPTI50010+V1000 W2,1 W/cm²370 mm480 mmPTI60020+V2000 W3,0 W/cm²460 mm570 mmPTI80020+V2000 W2,3 W/cm²610 mm780 mmPTI80025+V2500 W2,9 W/cm²610 mm780 mmPTI10030+V3000 W2,6 W/cm²780 mm980 ...
HX Series,Fluoropolymer (PTFE) Single-Element Coil HeaterTypical ApplicationsCompatible with most plating tank solutions; inert to acids,anodizing and pickling solutions up to 190°F (88°C). Checkcompatibility guide on pages 11-88 and 11-89 and withchemical supplier for proper sheath material selection. Replaces more expensive alumina or graphite heaters.Design Features✴ 10 watts/in2 (1.4 watts/cm2) for long service life✴ Non-contaminating Fluoropolymer (PTFE) covered stainless steel elements✴ T1 thermal fuse protection standard; T2 bi-metal switchoptional✴ Grounded internal metal element for safety✴ UL listed for US and Canada✴ Lightweight, non-floating construction✴ Vapor-tight polypropylene terminal enclosure withuniversal mou...
Polypropylene Cartridge Filter Chambers 3008SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate5,760 gphQuantity of Filter Tubes in Chamber8 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight285.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Tubular HeatersTubular heating elements from PreciseHeater™ are the most versatile and the best-suited industrial heating solution for a large number of applications. Tubular elements from PreciseHeater™ are factory-configured to almost any shape or size. Custom bending diameters can be made upon request and we can manufacture a variety of industrial heating solutions such as flanged tubular heaters. Tubular heaters are typically made using steel, stainless steel, Incoloy, inconel or titanium alloys. Tubular elements are often regarded as the foundation of all heating elements. These heating elements have a strong outer sheath to help protect the process heater from physical stress and uses high quality alloys to allow efficient heat transfer from resistance coil to you...
DC Rectifiers 1000A/DC power suppliesOutput power: max. 12000 Watt DC current: max. 1000A (at 12V) DC voltage: max. 1000V (at 10A) Typical applications: Laboratory plating lines Precious metal plating: Reel-to-reel platingPCB lines:Manual plating lines DC power supply with switch mode technology, designed for for installation into cabinet.Characteristic valuesLinearity inaccuracy:- for amperage - for voltage Ripple less than Efficiency typical 85 %Powerfactor cos φ 0,95Constant current and voltage control Soft start function Over temperature protectionPulse operation optionalMains supply: standard 3 x 380-600 V +/- 10 % / 50-60 Hz without N(other voltages on request) CoolingOptimized cooling air guiding, air consumption max....
Anodising Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks on the job w...
Horizontal Pumps 1000 - 3000 L/HHorizontal Pumps1000 - 3000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters
Vertical Pumps 40000 - 180000 L/HVertical Pumps40000 - 180000 L/HTypical applications• Designed and developed for low life cycle cost in corrosive low pressure applications• Scrubbing (fume and air)• Waste water treatment• RinsingFeatures• Low energy consumption due to high hydraulic efficiency and IE3 class Premium Efficiency Motor• Machined high grade Simona® AlphaPlus™ PP• Elastomers EPDM• Sealless pump, can run dry endlessly• Round mounting plate for easy installation• Including discharge pipe with GF union • Impeller locked (no damage with wrong rotation direction)• Oversized motor according to Hendor heavy duty specifications• Stainless steel shaft and fasteners (no metal in contact with liquid) • Motor 4...
Vertical Pumps 12000 - 43000 L/HVertical Pumps12000 - 43000 L/HTypical applications• Plating - Rinsing - Filtration• Waste treatmentFeatures• Immersion length 400mm • Environmentally safe in-tank installation• Free turning shaft - no seal• Self-priming - can run dry• Full length motor shaft • Outlet sockets available in PP, PVDF and CPVCOptions• Suction extension pipe• Hose connection• Out of Tank model
Ultra High Purity Plastic Heat Exchanger of FEP/PTFE/PFA:Teflon(Fluorpolymer) Heating and cooling coilsExchange areaSq.FtConnectionsInchLengthIn./mmWidthIn./mmThicknessIn./mmModel No.5.53/4 FNPT11.5(292)11.5(292)2(51)XC-12-12113/4 FNPT15.5(394)15.5(394)2(51)XC-16-1616.53/4 FNPT17.5(445)17.5(445)2.36(60)XC-18-18223/4 FNPT19.7(500)15.7(400)2.36(60)XC-20-1627.53/4 FNPT19.7(500)19.7(500)2.36(60)XC-20-20333/4 FNPT23.5(597)23.5(597)2.36(60)XC-24-2438.53/4 FNPT27.5(700)23.5(597)2.36(60)XC-28-24443/4 FNPT27.5(700)27.5(700)2.76(70)XC-28-2849.53/4 FNPT31.5(800)31.5(800)2.76(70)XC-32-32551 FNPT33.9(860)33.9(860)2.76(70)XC-34-3460.51 FNPT35.5(900)31.5(800)2.76(70)XC-36-32661 FNPT35.5(900)33.9(860)2.76(70)XC-36-3471.51 FNPT35.5(900)35.5(900)2.76(70)XC-36-36771 FN...
Barrel DanglersReplacement of Barrel Danglers, or the contact tips, should be part of any ongoing plating equipment maintenance programme. A damaged or worn dangler can impede the plating process and add to production costs.PreciseHeater Cathode Danglers for Plating EquipmentPolyurethane (PUR) plating cableHighly flexibleImpact and twist resistantAvailable in 16mm2 to 240mm2 (cross section)PVC options also suppliedDangler contact tips can be fixed or detachableContact tips supplied in mild steel, stainless steel, brass and copperDetachable tips can be provided and are particularly useful for copper and nickel plating where the tips can become coated, resulting in reduced plating efficiency. The screw-in tips can be replaced without the need for a new danglerEagle dangle...