Semiconductor Plating Electroplating Anodes Ruthenium Iridium MMO Coated Titanium AnodesSemiconductor PlatingBackground·Semiconductor manufacturing: reel-to-reel plating, pin plating, lead frame plating, spot plating, brush plating and electro polishing etc.Precious metal plating in electronics: Gold, Silver, Palladium, Rhodium, Ruthenium plating etc.·Water treatment and metal recovery from spent plating bathsAdvantages: ·Stable performance and long functional lifetime·Low bath voltage and homogeneous current distribution·Less additive consumption·Environmentally friendly·Low total cost of ownership
Fluoropolymer (PTFE/PFA) Heat Exchangers The Fluoropolymer Advantage -- A leader influoropolymer heat exchangers for over 50 years –now offers shell and tube heat exchangers madewith ultrahigh-purity (UHP) PFA tubing that allowschemical processors and others to conform to thehighest standards of purity.The UHP heat exchangers are single pass, countercurrent designs that incorporate PreciseHeater’s uniquehoneycomb construction. They are ideal for heatingand cooling ultrapure water, acids and othercorrosive chemicals typically used in electronics,pharmaceutical, and semiconductor manufacture.Our new XXP280 Heat exchanger is the latesttechnology for heating and cooling, corrosive and ultrapure chemicals. The heat exchanger’s100% Fluoropolymer construction and ruggeddesign will allow...
TiCu CladTitanium clad copperTitanium Clad Copper Bus Bar ：TiCu Clad – titanium Clad bars are made by using compound extrusion presses which ensures an optimal metallurgical bond between the copper core and the titanium coating.The TiCu Clad material is generally used in electrochemistry, in chlor-alkaline electrolysis, in galvanizing lines, in chromium-plating baths and wherever high corrosion protection and high current-carrying capacities are required.ApplicationsDimensionally stable anode in chlor-alkaline-electrolysisBusbars for supplying current in elecctro-zinc coating lines for strip productsBusbars for supplying current in galvanizing lines for steel stripsBusbars for supplying current in continuous coating lines for wire, tube and strip platingBusbars for supplying current in gal...
Temperature Controls (Heating Control System)Temperature ControllersCombination ControlDual Set-Point, 20 - 125 ampsProvides precise digital control for consistent plating and etch rates in most aqueous processes. Combination control features .3 inch (7.6mm), dual LED displays. Fluoropolymer (FEP) covered 10-foot 3m), 1000-ohm platinum RTD sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Dual setpoint with heating and cooling up to 30 amps. 120-240 volts. Single phase. Adjustable temperature range from -328°F (-200°C) to 4208°F (2320°C).Any electrically heated container must be equipped with a thermostat and a level monitoring system. It is, however, often not possible to integrat...
3 Phase Over the Side 3HX Series Three-Element PTFE Immersion HeatersWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg1000120240280(11)430(17)3HXP11173HXP1217 10 (4.5)1500120240480405(16)585(23)3HXP1.51233HXP1.52233HXP1.5423 11 (5)2000240480560(22)735(29)3HXP22293HXP2429 12 (5.5)3000240480735(29)890(35)3HXP32353HXP3435 14 (6.5)4000240480990(39)1195(47)3HXP42473HXP4447 17 (8)50002404801220(48)1500(59)3HXP52593HXP5459 20 (9)60002404801420(56)1725(68)3HXP62683HXP6468 23 (10.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 stai...
Nine elements Stainless steel HeatersImmersion Heaters | industrial heatersTubularDurable, efficient chemical heaterOver the side, durable, efficient, 9 element, tubular chemical heater. Heavy wall metal sheaths available in 316 stainless steel. Check solution recommendation chart with your chemical supplier for proper sheath material selection. Corrosion-resistant head. Three phase. Heats up to 180°F (82°C). Three phase. 9000-31500 watts, 208-600 volts. WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg9000240480255(10)430(17)9HSP92179HSP9417 16 (7.5)13500240480405(16)585(23)9HSP13.52239HSP13.5423 19 (9)22500240480510(20)735(29)9HSP22.52299HXP22.5429 23 (10.5)31500240480635(25)865(34)9HSP...
Over-the-Side Electric Immersion Heaters for Deep Tank: 304SS316SSTITANIUMWATTSVOLTSHotzoneMM/IN.OverallMM/IN.Model No.Model no.Ship/Wt.LBS(Kg)120003804801475(48)2440(96)SP12496TP1249637(17)120003804801475(48)3050(120)SP124120TP12412045(20)120003804801475(48)3655(144)SP124144TP12414453(24)150003804801930(76)2440(96)SP15496TP1549637(17)150003804801930(76)3050(120)SP154120TP15412045(20)150003804801930(76)3655(144)SP154144TP15414453(24)180003804802085(82)2440(96)SP18496TP1849637(17)180003804802085(82)3050(120)SP184120TP18412045(20)180003804802085(82)3655(144)SP184144TP18414453(24)Durable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 35 watts/square inch (5.4 w/cm²).Vapor resi...
Derated Triple Metal L-Shaped Immersion Heaters304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)1500120240330(13)380(15)D3LSP1.5113D3LSP1.5213D3LTP1.5113D3LTP1.5213 30 (14)3000240480430(17)940(37)D3LSP3217D3LSP3417D3LTP3217D3LTP3417 33 (15)4500240480560(22)940(37)D3LSP4.5222D3LSP4.5422D3LTP4.5222D3LTP4.5422 36(16.5)6000240480660(26)940(37)D3LSP6226D3LSP6426D3LTP6226D3LTP6426 39 (18)7500240480790(31)940(37)D3LSP7.5231D3LSP7.5431D3LTP7.5231D3LTP7.5431 42 (19)9000240480915(36)1270(50)D3LSP9236D3LSP9436D3LTP9236D3LTP9436 45 (20.5)120002404801120(44)1270(50)D3LSP12244D3LSP12444D3LTP12244D3LTP12444 54 (24.5)135002404801270(50)1270(50)D3LSP13.5250D3LSP13.5450D3LTP13.5250D3LTP13.5450 60&#...
Horizontal Pumps 2000 - 12000 L/HHorizontal Pumps2000 - 12000 L/HTypical applications• Ideal for clean or slightly contaminated acids and alkalines• Suitable for most plating solutions• Not suitable for electroless nickel and abrasive solutions or solutions which contain ferrous particlesFeatures• Magnetic drive• Sealless, therefore leakfree • Provide extra safety factor for agressive and expensive liquids• Standard with GF union connetions with a choice of sockets, available in PP, PVDF and CPVC• Max. temp. PP 80˚C / 176˚F , PVDF 100˚C / 212˚F• Motor with two component Polyurethane coating for excellent chemical resistanceOptions• Hose adapters• Flanges• Priming chamber• Dry run protection
Anodization Treatment Jigs & RacksPrecise Heater has manufactured and supplied huge volume of Customised Titanium Anodising Jigs to leading Auto components and Aerospace components suppliers across nation. Why Titanium Jigs:The answers are simple:1. Aluminum racks are consumable. Anodic film builds up, necessitating stripping.2. Titanium racks are consistent from run to run.3. Titanium racks don’t anodize as do aluminum racks. Therefore, you can use your rectifier to anodize parts, not racks.4. The higher initial cost of titanium racks is more than offset by the in-process savings, better consistency and longer life advantages of titanium.5. Above all, our titanium racks carry Servi-Sure quality and thought-through engineering into your tanks. The value of having Servi-Sure racks ...
fontQuad Barrel UnitsBarrel Units For ElectroplatingPlating barrel machines are available in single, double barrel unit (tandem barrels) or multi barrel formsThe majority of parts are manufactured from PE1000 grade polyethylene, giving extended lifeBarrel drop arm carriers are reinforced with high tensile steel rods for greater strength and stabilityAll top frames are manufactured from type 304 or 316 stainless steel with powder coated finish as an optional extraUnique self-aligning system Barrel units are supplied in integral drive or tank drive formatsFeatures of PreciseHeater Motorised Barrel UnitsOur unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the s...
Low Density PFA Bottom Immersion Heater 1.0kW To 30kW Chemical Solution HeaterMarketsSemiconductorLife SciencesIndustrialPFA heaters are designed specifically for use as direct electric heaters in plants and tanks where space is at a premium and high heating capacities and excellent resistance to aggressive process liquids are required. The very good chemical resistance of the heating cable is achieved by the use of a special sheath made of FEP or PFA. The surface power density is only 1 W/cm2.The PFA sheath should be selected for particularly critical operating conditions in extremely aggressive process liquids (such as mixed-acid chrome electrolyte) and for very high liquid temperatures (max. 100°C). The wide range of different shapes and designs provides simple solutions ...