3 Phase Over the Side Nine Element Fluoropolymer (PTFE) Heaters: WATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480230(9)430(17)9HXP32179HXP3417 28 (13)4500240480380(15)585(23)9HXP4.52239HXP4.5423 33 (15)6000240480535(21)735(29)9HXP62299HXP6429 36 (16.5)9000240480710(28)890(35)9HXP92359HXP9435 40 (18)12000240480965(38)1195(47)9HXP122479HXP12447 49 (22.5)150002404801195(47)1500(59)9HXP152599HXP15459 60 (27.5)180002404801400(55)1725(68)9HXP182689HXP18468 67 (30.5) PRODUCT DESCRIPTIONExcellent chemical resistance to aggressive acids.FEATURESPTFE sleeved 304 ...
Three Elements Stainless steel Heater-Plating Immersion HeatersWATTSVOLTSHot zonemm/inOverallmm/inModel No.Ship WT.Lbs./Kg3000240480280(11)430(17)3HSP32173HSP3417 9 (4)4500240480405(16)585(23)3HSP4.52233HSP4.5423 10 (4.5)7500240480535(21)735(29)3HSP7.52293HSP7.5429 12 (5.5)10500240480660(26)865(34)3HSP10.52343HSP10.5434 14 (6.5)PRODUCT DESCRIPTIONDurable, efficient chemical heater.FEATURESHeavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.Watt densities up to 40 watts/square inch (6.2 w/cm²).Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.Grounded construction and built in t...
Triple Tubes Metal Immersion Heater for Deep Tank304 SS316 SSTitaniumWATTSVOLTSHot zoneMM/IN.RISERMM/IN.Model No.Model No.Ship Wt.LBS./(Kg)3000240480330(13)485(19)3LVSP32133LVSP34133LVTP32133LVTP3413 30 (14)6000240480430(17)940(37)3LVSP62173LVSP64173LVTP62173LVTP6417 33 (15)9000240480560(22)940(37)3LVSP92223LVSP94223LVTP92223LVTP9422 36(16.5)12000240480660(26)940(37)3LVSP122263LVSP124263LVTP122263LVTP12426 39 (18)15000240480790(31)940(37)3LVSP152313LVSP154313LVTP152313LVTP15431 42 (19)18000240480915(36)1270(50)3LVSP182363LVSP184363LVTP182363LVTP18436 45 (20.5)240002404801120(44)1270(50)3LVSP242443LVSP244443LVTP242443LVTP24444 54 (24.5)270002404801270(50)1270(50)3LVSP272503LVSP274503LVTP272503LVTP27450 60 (27.5)30000...
2KW To 18KW Baths Inline Fluid Heater PFA Immersion Frame HeatersPFA Immersion Frame Heaters are great for heating fluid baths to a constant temperatureMarketsSemiconductorLife SciencesIndustrialApplicationsFluid HeatingFluoropolymer Sleeve Heating Element Quality resistance element is sleeved in braided material for even coil separation. The entire element is given an outer sleeving of pretested and pre-extruded fluoropolymer tubing. THIS IS NOT A COATED PRODUCT.Over-temperature Thermocouple The over-temperature cutoff device protects the integrity of the fluoropolymer heater. If an opera- tor should leave the heater on while draining or aspirating a tank, when used in conjunction with a temperature control device, it will automatically shut off the heater when it is exposed to air.PRODUC...
Flexible Heaters - Teflon HeaterFlexible by design - grounded and with flexible risersAn all-round heater! Resistant to most acids and alkalines. Max 100° C bath temperature as standard.Safe heating! Heating part deeply submersed or placed on tank bottom.Efficient! Increased heating-up ability compared with conventional tubular heater.Space saver! Compact design and flexible riser makes it easy to install these heaters with maintained safety.Reliable duty! We guarantee positive contact between the heating element and the teflon layer. Heat is transferred directly to the bath without internal build-up, thus increasing element life.Easy maintenance! Shape of heater is simple and easy to overview and hence easy to clean.Valuable! The heating eleme...
PLATE HEAT EXCHANGERS (PHE)Plate Heat ExchangerPlate Heat Exchangers “PHE” are utilized in heating andcooling systems designs requiring maximum and efficient heattransfer performance in a small footprint.Applications include food industry, industrial processes, DHW,space heating, steam heating, HVAC free cooling and aquaticseawater systems.Plate materials are available in 316SS, Titanium, Hastelloy orSMO 254. Plate patterns and gaskets are selected based on fluidproperties and thermal heat transfer performance of materialsrequired. Connections are available ASNI flanged, ANSI stud& NPT.Aquatic sea water package includes TI plates, TI nozzles/inserts, 316 SS carry bar & tie bolts and corrosive inhibitingepoxy finish. “THE MOST EFFICIENT THERMAL EXCHANGEDESIGN IN THE INDUSTRY...
Polypropylene Cartridge Filter Chambers 2038SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate12,960 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P30P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection3' Flange Weight2110.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.
Explosion-Proof Flanged Immersion HeatersPreciseHeater’s explosion-proof flanged immersion heaters are one of the most widely used solutions for heating fluids and gases in hazardous locations. CSA approved for Class 1, Division 1, Group B, C and D locations and/or approved for ATEX and IECEx Zone 1 and/or Zone 21 locations. PreciseHeater's explosion-proof flange heaters are designed for use in tanks, vessels, and in-line heating.Product HighlightsWattages up to 8.5 megawattsWatt densities up to 200 w/in2Voltages up to 600VElement sheath temperatures up to 1,500°FMultiple flange and element materialsFlange sizes up to 30' and 2500# ASME B16.5Standard Construction FeaturesANSI B16.5 150# or 300# flange 3' up to 30' (max flange size of 24' for div 1 ...
Metal-Titanium PartsDescriptions Of TitaniumCompared to other metals, titanium is a lustrous and silver transition metal with low density and high corrosion resistance to sea water, aqua regia and chlorine, etc. Titanium is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy.Advanced Refractory Metals is a leading supplier of titanium products. We offer low pricing and great lead times on all our materials, and we’re capable of supplying custom materials per any specs/drawings you provide us with.List Of Our Titanium ProductsTitanium Wire (diameter)0.050 mm0.063 mm0.080 mm0.10 mm0.125 mm0.16 mm0.20 mm0.25 mm0.32 mm0.40 mm0.50 mm0.63 mm0.80 mm1.0 mm1.60 mmTitanium Rod ...
62' 25KW 48 watts per sq. inch Flange Heater62 inch, 25kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
78' 30KW 48 watts per sq. inch Flange Heater78 inch, 30kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 or 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K
Flexible Riser Over-the-Side Fluoropolymer (PTFE) Immersion HeatersExcellent chemical resistance to aggressive acids! Compatible with virtually any chemistryCustom, low watt density, flexible riser bottom heater has heavy-wall fluoropolymer (PTFE) sleeved 316 stainless elements inert to most solutions up to 212°F (100°C) and a chemical resistance to aggressive acids! Grounded internal metal element and built-in thermal protector. Resettable P3 protector. Corrosion-resistant head. Single phase. 1000-6000 watts, 120-600 volts.ApplicationsSurface FinishingAnodizingPrecious Metal DepositionGeneral Metal FinishingUp to 100°C (212°F) 1000 to 6,000 Watts 120 to 600 Volts PTFE sleeved 316 stainless steel 1.HXSL Flex Riser PTFE Heater, 1kW, Cus...