Products - Guangzhou Precise Heater

Products Products

Products / Products

Release Time: 2001 - 05 - 18

Ceramic Cartridge Heaters DescriptionCeramic Heating CartridgeDirect heating of liquids and under certain conditions of non-aqueous and non-liquid productsModular basisFrom 0.5 kW to 9.5 kWCeramic cartridge heaters are specially suited to the direct heating of liquids. Under certain conditions they can also be used for direct heating of non- aqueous and non-liquid mediaCeramic heating cartridgeThe cartridge heaters consist of ceramic groove bodies with high electrical insulation and excellent temperature fluctuation resistance. A high temperature heating wire is fitted as a coil in order to ensure good heat radiation and a long life-span of the cartridge.Accessories and OptionsTERMINAL CASING BCMaterial red terminal casing : PP, ref. BCMaterial white terminal casing : PVDF, ref. ...

52" 20KW 48 watts per sq. inch Flange Heater

Release Time: 2001 - 05 - 09

52' 20KW 48 watts per sq. inch Flange Heater52 inch, 20kw, 48 watt per square inch flange heater. Suitable for heating process water and mild solutions.Titanium/316SS/Incoloy sheath element (other sheath material available)Titanium/316SS/Incoloy thermowell150lb. flange (300lb. available)1 or 3 phase208 to 600 voltN1, N4 and N7 Terminal housing optionsFor heavily corrosive applications, please call. Other sheath material, such as titanium, inconnel, monel and etc., are available.Optional Flange Heater Configurations:T1, T2 and T3 ThermostatsProcess Thermocouples: J, K or 100 ohm RTDHi-Limit over temp thermocouple clamped to element sheath: J or K

Plastic Shell Tube Heat Exchanger

Release Time: 2001 - 04 - 04

Plastic Shell Tube Heat ExchangerPolymer heat exchangers are suitable forheating and cooling a variety of media whe-re metallic plate heat exchangers cannotbe used.The required size can be selected accordingto the desired thermal output and the con-tainer dimensions.The heat exchangers are integrated in thecontainer via either factory-fitted attach-ments, or via a mount on the frame.Alternatively, rods that protrude from theheat exchanger are available for fitting atthe customer’s site.The tube design implicates a large heattransfer area. The transfer area is even largerthan with plate heat exchangers at thesame displaced volume.This means that an adequate thermal out-put can be achieved despite the lower heattransfer properties of polymers.Polymer heat exchangers have PFA tubeswhich are w...

HXO Series SIngle Tube, FLuoropolymer (PTFE) Immersion Heaters

Release Time: 2001 - 02 - 14

HXO Series Single Tube, FLuoropolymer (PTFE) Immersion HeatersProduct Features and Benefits:SUPERIOR CHEMICAL RESISTANCE: Inert tomost aqueous acid, alkaline, anodizing and picklingsolutions up to 212°F (100°C).RUGGED CONSTRUCTION: Heavy wall fluoropoly-mer (PTFE) covered stainless steel element reducespermeation and eliminates the need for gas purgesystems. Guaranteed 100% pinhole free.OUSTANDING PERFORMANCE: Low watt densitydesign (10 watts/square inch, 1.5w/cm2) for long servicelife.CORROSION RESISTANT HEAD: Vapor tight, flameretardant polypropylene terminal enclosure with 3-foot(.9m) flexible PVC liquid tight conduit.SAFETY FEATURES:Grounded internal metal element.Thermal protector built in. Replaceable PT-I fusestandard for solutions up to 190°F (88°C).Non-floating...

Polypropylene Cartridge Filter Chambers 2018

Release Time: 1999 - 05 - 12

Polypropylene Cartridge Filter Chambers 2018SpecificationsSeriesP Series MaterialPolypropylene Max. Temperature180 ºFRecommended Filtration Rate8,640 gphQuantity of Filter Tubes in Chamber18 Size of Filter Tubes in ChamberMSC15P20P Max. Pressure at 72ºF140 psiInlet Connection2' Flange Outlet Connection2' Flange Weight290.0 lbsManufacturerPrecise Heater1 Maximum pressure is lower at higher temperatures, consult factory.2 Add Approximately 15% for shipping.

Temperature Protectors

Release Time: 1999 - 04 - 01

Temperature Protectors1, 2, and 3 Series ProtectorsThermal overload protectionThe Protector 1 overtemperature control system utilizes a heat sensitive fuse to detect overheat conditions. The protector, placed inside a thermowell, positioned in contact with the heater sheath, will cut power to the heater in the event of low liquid The Protector 2 and Protector 3 systems provide the same reliable overtemperature protection as Protector 1 However, the control systems feature a heat sensing thermostat. If the liquid level drops and the heater reaches a preset overheat heater can quickly be made operational by pushing the reset button on the control to restore power. Protector 3 is designed for flexible lead or high temperature fluoropolymer (PTFE) heater applications only.

Immersion Heat Exchanger Coils for Corrosive/Ultrapure Chemicals

Release Time: 2024 - 04 - 01

Immersion Heat Exchanger Coils for Corrosive/Ultrapure ChemicalsToday, Immersion Coils for heating and cooling are available in a variety of shapes, materials,designs and assemblies from various manufacturers. Polymer (Polyethylene, High Performancefluoropolymer), common and exotic metal alloys, pancake coil shapes, racetrack coils, gridstructures, spaghetti tube U bends, welded and non-welded tube terminations, and tube endsconnected to a manifold are among the many options available. Less than fully informeddecisions lead to suboptimal or wrong choices (for example, based on purchase price only).Such choices end up in faster than expected deteriorating performance or even catastrophicfailure.Among materials, fluoropolymer coils have been around for 40+ years, and have secured aunique pos...

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTAT

Release Time: 2021 - 05 - 14

ELECTRIC IMMERSION HEATER WITH DIGITAL THERMOSTATDescriptionImmersion heater element kits which include heater enclosure and digital thermostat with temperature probe. Immersion Heater with Digital Thermostat Single phase power supply connectionLow heat density, ideal for heating used/waste vegetable oils.Digital temperature controller2' BSP fittingThermocouple integrated into the elementThese heating elements are specifically designed with a low heat density. This means while the output of the heater element is still 800W or 2400W the surface of the element does not get as hot as other elements. This helps prevent degradation of the fluid being heated. Having a low heat density makes these heaters ideal for heating biodiesel and vegetable oil...

Horizontal Pumps 10000 - 40000 L/H

Release Time: 2021 - 04 - 02

Horizontal Pumps 10000 - 40000 L/HHorizontal Pumps10000 - 40000 L/HTypical applications• Hazardous and toxic solutions• Acids, alkalines and other corrosive liquids• Plating, pre- and post-treatment solutionsFeatures• Magnetic coupled, sealless providing maximum safety• High power Neodymium rare-earth magnets • Increased efficiency by incorporated vortex chamber• Robust structure providing reliable and secure performance• Highly durable PP allowing temperatures up to 80˚C• Standard with GF union connetions with a choice of sockets• Modular design for easy and low cost maintenance• Quality fasteners out of passivated Stainless Steel• European made motor with acid resistant 70 µm 2C PU coating Options• Hose adapters or flanges• Priming chamb...

Products Inline Chemical Heater

You are here : Home → Products →

Fluoropolymer Shell and Tube Heat Exchangers

Fluoropolymer Shell and Tube Heat ExchangersThe AllroundersFluoropolymer Shell and Tube Heat Exchangers made of Moldflon® plastics are designed for external use and are almost universally resistant to acids, alkalis and corrosion.For safe heating - cooling - condensing of pure and ultra pure media. Manufactured entirely from Moldflon® PFA, PVDF, PP or PE, possible contamination from other materials is avoided.All the welded joints for the flow of inner media are fabricated based on a non-contact IR butt welding process which is particular important when using pure and high purity media. Dead spots where for example bacterial contamination may occur, are ruled out by this welding process.All the IR welds are computer controlled and the welding parameters of these jo...

Learn More

Order online

PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIES

PTFE (TEFLON) HEATERS-FLEXBILE RISER SERIESCompatible with virtually any chemistryExcellent chemical resistance to aggressive acids! Inert to most solutions with a corrosion-resistant head. Low watt density. Built-in thermal protector and grounded element. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). 1000-6000 watts, 120-600 volts (600 volts on 4500 watts or lower only)ApplicationsChemical HeatingAnodizingSurface FinishingFeatures & ValuesInert to most aqueous acid, alkaline, anodizing, &pickling solutions up to 100°C (212°F)Rugged, heavy wall PTFE covered stainless steelelement reduces permeation. Guaranteed 100%pinhole free Space saving & long service life with low Watt densitydesign of 10 W/in2...

Learn More

Order online

PTFE Immersion Heater-Flat Bottom

PTFE Immersion Heater-Flat BottomPTFE Immersion HeaterPower from 0.5 kW to 15 kWMinimum bulkQuick to installModels adapted to all classic tank configurations and offers a large exchange surface in a minimum bulk.Assembly Type AOn metallic frame coated PP, PVDF, FEP or stainless steel frame.Standard configuration: heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use with feet at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.With options Feet & Cable-gland these models are specifically adapted to keep liquid storagetanks from freezing, all sizes with or without double wall. Installation through the inspection trap(ø 500 mm minimum). Can be installed in a tank filled when support feet are ordered on ea...

Learn More

Order online

Industrial Immersion Heaters - Fluoropolymer Heater

Industrial Immersion Heaters - Fluoropolymer HeaterHigh performance,non-corrodable electrictank heater The Popular is manufactured from high integrityfluoropolymers to give best protection againstdeterioration and to give high performance incorrosive solutions.Now available - fitted to orderOTP: Protect your plant from catastrophic heater failure.Switches the heater off if the element gets too hot.HPD: Protect your heater from low level failure.Simple conductive level device built into the heater. The element has an open construction to allow free flow of liquid across the surface and to limit solidretention, which is particularly important when used in solutions which generate solid deposition suchas electroless nickel and copper plating processes.The heater is thin enough to fi...

Learn More

Order online

PFA coated Electric Immersion Heater

PFA coated Electric Immersion HeaterOur immersion heaters consist of a stainless steel heating element encapsulated with a MoldflonTM-PFA tube using a unique process which minimizes air inclusion and improves thermal efficiency. The connecting harness consists of electrical cables which are wrapped together with a PTFE film and then shrouded in a PolytetraflonTM-PTFE outer shell which can be hermetically sealed to the tank using a suitable bulk-head fitting. The combination of materials used provide a thermally stable interconnecting system suitable for use in a wide range of applications and process temperatures.The heater head is machined from solid PolytetraflonTM-PTFE without any mechanical connections. The heater tubes and connecting harness are welded in place...

Learn More

Order online

Teflon Tubular Heater

Teflon Tubular HeaterHeadSealing IP 66 (Nema 4X). Reinforced PP, diameter 85 mm. Threaded lid, sealed with O-rings. Easy opening head to replace conduit or heating element.Heating elementHeat resistant 304 stainless steel element. Element can easily be changed if necessary.Conduit of PVCEarthed to metal parts. Standard length 2 metres. Other lenghts on request.Heat exchange surface watt/cm2 = HESSpecify +V:1 for 1 phase 230 V2 for 3 phase 230 V3 for 3 phase 400 V4 for 1 phase 240 V5 for 3 phase 415 VWattsSurface RatingHot zoneOverallPTE60010+V1000 W2,1 W/cm²460 mm570 mmPTE80018+V1800 W2,3 W/cm²610 mm780 mmPTE10022+V2200 W2,0 W/cm²780 mm980 mmPTE12528+V2800 W2,0 W/cm²900 mm1210 mmPTE15033+V3300 W2,2 W/cm²1150 mm1470 mm

Learn More

Order online

Wear Resistance Platinum Coated Titanium Electrodes PCB Gold Plating Anodes

Wear Resistance Platinum Coated Titanium Electrodes PCB Gold Plating AnodesPlating a thin layer of nickel, tin, gold or alloy coating on electronics parts improves the electrical conductivity. For example the Ni/Au plating process is utilized in the PCB industry to improve the electrical performance of contact area with the purpose to obtain a low electrical contact resistance; good wear resistance and protection against oxidation (corrosion). Precise Heater special anodes can supply both Platinised anodes and Iridium Mixed Metal Oxide (MMO) coated Titanium anodes. The optimum anode coating depends on the client specific application requirements. Platinised anodes supplied by Precise Heater special anodes are already being widely used in these processes by various major manufacturers. ...

Learn More

Order online

Total259StripPage22/22HomePrev... 13141516171819202122NextEnd